Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Lewiston, ID

DBCI Roll-Up Door Repair in Lewiston, ID

Sheet roll-up doors for storage units, sheds and warehouses repaired. Typical cost $150-$600.

Need DBCI roll-up door repair in Lewiston, ID? We diagnose the problem, give you a price before any work starts, and finish most jobs in a single visit. Sheet roll-up doors for storage units, sheds and warehouses repaired. Our technicians service DBCI commercial doors regularly and know where the model and date labels are, which makes ordering the right part quicker. DBCI makes roll-up doors and hallway systems for self-storage.

Is it time for DBCI roll-up door repair?

  • The door is hard to lift or won't stay up
  • A dented or creased curtain
  • The latch won't lock
  • The door comes out of its guides

What usually causes it

  • Loss of spring tension
  • Impact damage
  • Worn latches and stops

Safe checks before you call

  • Check whether the stops at the top of the guides are in place.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

Our DBCI roll-up door repair process

  1. Inspect the curtain, guides and drum
  2. Adjust or replace the springs
  3. Repair the curtain or replace the door
  4. Replace latches and stops
  5. Test it

DBCI Roll-Up Door Repair cost in Lewiston, ID

$150-$600Typical range, parts & labor
1-2 hoursTypical time on site

What moves the price:

  • Door size, gauge and cycle rating
  • Operator type and controls
  • Parts availability for your model
  • Lift equipment and after-hours access

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

DBCI Roll-Up Door Repair in Lewiston, ID

Large daily temperature swings in Idaho work hinge screws and track bolts loose, which leads to noise, wobble and eventually an off-track door.

Besides Lewiston (ZIP code 83501), we handle DBCI roll-up door repair in Clarkston, WA (1.3 mi), West Clarkston-Highland, WA (2.4 mi), Lewiston Orchards (3.2 mi) and Clarkston Heights-Vineland, WA (3.7 mi). Call (833) 435-8883 to book a visit in Lewiston.

DBCI Roll-Up Door Repair: frequently asked questions

How much does DBCI roll-up door repair cost in Lewiston, ID?

DBCI Roll-Up Door Repair typically costs $150-$600 including parts and labor, and usually takes 1-2 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do DBCI roll-up door repair the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is DBCI roll-up door repair covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and DBCI warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Idaho or Lewiston requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my commercial door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the commercial door is near the end of its life, replace it. Commercial doors are rated by cycles. If the door has reached its rated cycle life, has several damaged sections, or parts are no longer made, replacing it is often cheaper over the next few years. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Lewiston, ID

Glass & Aluminum Garage Doors

Modern full-view aluminum doors with tempered or insulated glass.

Typical $3,000-$10,000

Overhead Door Opener Circuit Board Replacement

Overhead Door-brand openers come from the same company as Genie, the Overhead Door Corporation.

Typical $175-$400

Richards-Wilcox Rolling Steel Door Repair

Rolling steel service doors, curtains, guides and springs repaired.

Typical $300-$1,500

Hörmann Garage Door Opener Installation

New chain, belt, screw-drive and wall-mount openers installed and programmed.

Typical $350-$800

Raynor Garage Door Installation

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $1,200-$4,500

Ideal Door Garage Door Repair

Diagnosis and repair for doors that are stuck, noisy, crooked or won't open or close.

Typical $150-$450

Garaga Garage Door Panel Replacement

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $300-$900

Chamberlain Opener Circuit Board Replacement

Chamberlain is the retail line of The Chamberlain Group, sold at home centers. It uses the same Security+ 2.0 remote technology and myQ app as LiftMaster, so many accessories work with both brands.

Typical $175-$400

Remote & Keypad Programming

Remotes, keypads and car buttons matched and programmed to your opener.

Typical $50-$150

Opener Gear & Sprocket Replacement

Stripped drive gears replaced so the motor moves the door again.

Typical $125-$275

Wayne Dalton Extension Spring Replacement

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $150-$350

Holmes Garage Door Garage Door Panel Replacement

Dented, cracked or rusted sections replaced or repaired to match your door.

Typical $300-$900

Garage door stuck, noisy or broken?

Talk to a garage door technician in Lewiston, ID now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote